SimuTech Group Training

We are excited to present over 10 new courses this year. In addition we have expanded our Workbench and CFD courses to meet growing demand and requests.

Locations offered:

Toronto, Montreal, and Calgary

On location in your office – Call for Details

Special pricing applies for Private Groups, on Location or for Pre-Purchasing a block of training days.

Included in Training:

Course Manual & Workshops
Lunch
Excellent Modern Facility
Small Groups
Additional Information:

Courses can be customized to meet the needs or any special requirements
Private Training can be arranged at our facility or yours
Mentoring Session – (Project specific help) can also be arranged at our facility or yours

Don’t see the course you are looking for – Call or email This email address is being protected from spambots. You need JavaScript enabled to view it. at 416.249.1471 x221 for Details

Files:

ANSYS CFX Advanced Fluids, Multiphase, Turbulence Version:R14.0
This course is designed to expose ANSYS CFX users to advanced topics in CFD and fluid flow. The course covers the governing equations, boundary conditions, and numerical topics such as discretization and Convergence ( pertinent to ANSYS CFX). Specialized topics in heat transfer, turbulence modeling, non-Newtonian effects, buoyancy, and compressible flows are covered.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 560.79 KB 288

ANSYS Workbench Introduction to CFX Part 2 Version:R14.0
ANSYS CFX is a fluid analysis software tool that combines CAD input, automatic meshing and a fast solution algorithm. The ANSYS Introduction to CFX Part 2 Course is a two-day course and consists of lectures and "hands-on" practical examples.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 562.43 KB 277

ANSYS Workbench Introduction to CFX Part 1 Version:R14.0
ANSYS CFX is a fluid analysis software tool that combines CAD input, automatic meshing and a fast solution algorithm. The ANSYS Introduction to CFX Part 1 Course is a three-day course and consists of lectures and "hands-on" practical examples.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 562.28 KB 321

ANSYS Workbench Low Frequency Emag Version:R14.0
A three-day course in Electromagnetic Analysis is recommended for analysts who perform magnetostatic, low frequency harmonic and transient electromagnetic analyses. Attendees learn how to set up and solve electromagnetic field problems, compute field quantities, extract forces, torque, eddy currents, and losses.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 413.55 KB 281

ANSYS Workbench Simulation Emag Version:R14.0
ANSYS Workbench-Simulation Emag is a 2-day training course that covers how to perform magnetostatic analyses of 3D geometric models using the SOLID117 edge formulated element available in ANSYS.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 560.58 KB 282

ANSYS Workbench Design Xplorer
ANSYS Workbench - DesignXplorer is an application that works with parameters to explore various design configurations and their analysis response. DesignXplorer offers dynamic interaction with the design envelope. Utilizing advanced parametric control, DesignXplorer provides instantaneous feedback on all your proposed design modifications, dramatically decreasing the number of design iterations and improving the overall design process.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 562.2 KB 252

ANSYS Workbench Rigid and Flexible Dynamics Version:R14.0
The ANSYS Rigid and Flexible Dynamic Analysis training course covers rigid and flexible body kinematics analysis using the Workbench-Simulation interface.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 412.99 KB 362

ANSYS Workbench Simulation Dynamics Version:R14.0
ANSYS Workbench-Simulation Dynamics is for engineers wishing to use Workbench Simulation to analyze the dynamic response of structures. The course focuses on performing modal, harmonic, flexible dynamic, and random vibration (PSD) analyses.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 561.48 KB 304

ANSYS Workbench Simulation Heat Transfer Version:R14.0
ANSYS Workbench-Simulation Heat Transfer is for engineers wishing to use Workbench Simulation to analyze the thermal response of structures and components. The course focuses on performing steady-state, transient, linear and nonlinear thermal analyses.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 561.73 KB 310

ANSYS Workbench DesignModeler Version:R14.0
The ANSYS Workbench - DesignModeler training course is for users that want to create and modify geometry in preparation for analysis in ANSYS or ANSYS Workbench.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 561.02 KB 268

ANSYS Workbench Simulation Structural Nonlinear Version:R14.0
ANSYS Workbench-Simulation Structural Nonlinearities is for engineers that need to perform structural nonlinear analyses using the Workbench-Simulation environment. It is intended for users already familiar with the procedures for performing a linear static analysis in Workbench-Simulation.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-10 561.23 KB 338

ANSYS Workbench Simulation Intro Version:R14.0
ANSYS Workbench-Simulation Introduction is an intuitive up-front simulation tool that is used in conjunction with CAD systems. It verifies product performance early in the concept and in the early design stages of product development.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-09 561.88 KB 223

SimuTech Group Canada Course Descriptions Version:2012
A complete list and descriptions of the ANSYS Workbench and Classic courses offered by SimuTech Group Canada.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-09 722.57 KB 390

Comprehensive ANSYS Intro Version:R14.0
The overall goal is to produce “rational and intelligent usage” by teaching the philosophy and fundamentals of ANSYS Traditional & WB. The systematic integration of the two interfaces will be addressed. FE concepts will also be discussed (averaging, stress convergence, etc.). The course is intended to give knowledge of the ANSYS product for developing simulation models and performing structural analyses.

This email address is being protected from spambots. You need JavaScript enabled to view it. 2012-08-09 431.81 KB 232